RT40 Sedan RT50 Coupe RT56 5 door RT46G Wagon RT46 Pickup
RT50 Corona Coupe
RT50 Toyota Corona Hardtop Coupe
RT50/RT51 General Specifications:
For Australian Delivered Model.

Engine:  2R in Early 1500 2-door Model,
4R in 1600 S Model,
9R engine is fitted to 1600 GT Model.
Wheelbase: 2, 420 mm
Length: 4, 125 mm
Width: 1, 565 mm
Height: 1, 375 mm
Ground Clearance: 180 mm
Weight: 960 kg (1031 kg - 1600GT)
Seating Capacity: Four

RT51 Corona 1600 GT
RT51 Toyota Corona 1600 GT Hardtop Coupe
1600 GT
.
Engine: 2R (Early Model 1500 2-door) 4R  (1600 S)  9R ( 1600 GT )
Firing Order: - 1-2-4-3 - 1-3-4-2 - 1-3-4-2
Type: - 4-cylinder Inline 
OHV
- 4-cylinder Inline 
OHV
- 4-cylinder Inline
DOHC
Capacity: - 1490 cc (90.9 ci) - 1587 cc (96.8 ci) - 1587 cc (96.8 ci)
Bore: - 78mm - 80.5mm - 80.5 mm
Stroke: - 78mm - 78mm - 78 mm
Compression Ratio: - 8.0:1 - 9.2:1 - 9:1
Compression Pressure: - 155 psi at 250 rpm  - 156 psi at 250 rpm
Power: - 55 kW @ 5000 rpm - 71 kW @ 5800 rpm - 82 kW @ 6200 rpm
Torque: - 115 Nm @ 2600 rpm - 129 Nm @ 4200 rpm - 137 Nm @ 5000 rpm
Carburetor: - Single Down draft
Asian-SU
- Twin Side draft
Asian-SU
- Twin Side draft,
Double choke Solex
Ignition Timing: - 8 degrees btdc - 8 degrees btdc -
Idling Speed: - 500 rpm - 700 rpm -
Final Drive Ratio: - 3.70 (4 speed),
4.111 (auto).
- 4.111(4 speed) - 4.111 & 4.625
Limited Slip Differential(s).
Transmission Options: - 2 speed Toyoglide automatic,
4 speed manual.
- 4 speed manual. - 5 speed manual.
Brakes: - Front disc brakes and rear drums. - Front disc brakes and rear drums. - Front 10.6" disc brakes and rear 9" drums.
Suspension: - Front Independent, coil springs, Rear semi-eliptical leaf springs. - Front Independent, coil springs, Rear semi-eliptical leaf springs. - Front Independent, coil springs, Rear semi-eliptical leaf springs, twin torque rods.
.
 
RT40 Sedan RT50 Coupe RT56 5 door RT46G Wagon RT46 Pickup

This site is created by Turbo Creations  -M Drach 2003.